Yied Hand Dryer, Superior Quality. Hand Dryer, Automatic Hand Dryer, Touchless Hand Dryer, Hand Dryer No Touch Bobrick zh-cn <![CDATA[Air Body Dryer YD-750-3]]> Mon, 17 Nov 2008 15:59:31 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Air Body Dryer YD-750-2]]> Mon, 17 Nov 2008 15:59:06 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Air Body Dryer YD-750-1]]> Mon, 17 Nov 2008 15:58:46 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Bathroom Body Dryer YD-750-3]]> Mon, 17 Nov 2008 15:58:24 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Bathroom Body Dryer YD-750-2]]> Mon, 17 Nov 2008 15:57:58 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Bathroom Body Dryer YD-750-1]]> Mon, 17 Nov 2008 15:57:36 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Body Dryers YD-750-3]]> Mon, 17 Nov 2008 15:57:08 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Body Dryers YD-750-2]]> Mon, 17 Nov 2008 15:56:47 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Body Dryers YD-750-1]]> Mon, 17 Nov 2008 15:56:26 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Body Dryer YD-750-3]]> Mon, 17 Nov 2008 15:56:01 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Body Dryer YD-750-2]]> Mon, 17 Nov 2008 15:55:35 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Body Dryer YD-750-1]]> Mon, 17 Nov 2008 15:55:14 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Hair Dryer Stands YD-750-3]]> Mon, 17 Nov 2008 15:54:43 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Hair Dryer Stands YD-750-2]]> Mon, 17 Nov 2008 15:54:20 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Hair Dryer Stands YD-750-1]]> Mon, 17 Nov 2008 15:53:57 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Commercial Hair Dryer YD-750-3]]> Mon, 17 Nov 2008 15:53:27 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Commercial Hair Dryer YD-750-2]]> Mon, 17 Nov 2008 15:53:03 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Commercial Hair Dryer YD-750-1]]> Mon, 17 Nov 2008 15:52:39 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Hair Dryer Storage YD-750-3]]> Mon, 17 Nov 2008 15:51:53 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Hair Dryer Storage YD-750-2]]> Mon, 17 Nov 2008 15:51:29 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Hair Dryer Storage YD-750-1]]> Mon, 17 Nov 2008 15:51:07 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[European Hair Dryer YD-750-3]]> Mon, 17 Nov 2008 15:50:34 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[European Hair Dryer YD-750-2]]> Mon, 17 Nov 2008 15:50:10 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[European Hair Dryer YD-750-1]]> Mon, 17 Nov 2008 15:49:47 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Dryer Hair Infinity YD-750-3]]> Mon, 17 Nov 2008 15:46:10 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Dryer Hair Infinity YD-750-2]]> Mon, 17 Nov 2008 15:45:46 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Dryer Hair Infinity YD-750-1]]> Mon, 17 Nov 2008 15:45:17 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Wall Hair Dryer YD-750-3]]> Mon, 17 Nov 2008 15:44:48 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Wall Hair Dryer YD-750-2]]> Mon, 17 Nov 2008 15:44:26 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Wall Hair Dryer YD-750-1]]> Mon, 17 Nov 2008 15:44:01 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Best Hair Dryer YD-750-3]]> Mon, 17 Nov 2008 15:42:11 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Best Hair Dryer YD-750-2]]> Mon, 17 Nov 2008 15:41:45 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Best Hair Dryer YD-750-1]]> Mon, 17 Nov 2008 15:41:23 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Portable Hair Dryer YD-750-3]]> Mon, 17 Nov 2008 15:40:21 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Portable Hair Dryer YD-750-2]]> Mon, 17 Nov 2008 15:40:00 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC


We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Portable Hair Dryer YD-750-1]]> Mon, 17 Nov 2008 15:39:35 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no


We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Professional Hair Dryer YD-750-3]]> Mon, 17 Nov 2008 15:39:05 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Professional Hair Dryer YD-750-2]]> Mon, 17 Nov 2008 15:38:39 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Professional Hair Dryer YD-750-1]]> Mon, 17 Nov 2008 15:38:15 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Wall Mounted Hair Dryer YD-750-3]]> Mon, 17 Nov 2008 15:37:45 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Wall Mounted Hair Dryer YD-750-2]]> Mon, 17 Nov 2008 15:37:24 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Wall Mounted Hair Dryer YD-750-1]]> Mon, 17 Nov 2008 15:36:42 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Hair Dryer Holder YD-750-3]]> Mon, 17 Nov 2008 15:36:03 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Hair Dryer Holder YD-750-2]]> Mon, 17 Nov 2008 15:35:40 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Hair Dryer Holder YD-750-1]]> Mon, 17 Nov 2008 15:35:12 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Hair Dryer Stand YD-750-3]]> Mon, 17 Nov 2008 15:34:44 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Hair Dryer Stand YD-750-2]]> Mon, 17 Nov 2008 15:34:17 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC


We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Hair Dryer Stand YD-750-1]]> Mon, 17 Nov 2008 15:33:55 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Hair Dryer YD-750-3]]> Mon, 17 Nov 2008 15:33:26 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.
Specifications  Safety timer automatically shuts off after 10 minutes.
   Voltage:  220V~50Hz
   Current:  4.5A
   Power :  1000W
   Wind Speed :  13.5-14m/s
   Body cover :  Plastic
   Size(mm) :  250x185x100
   Pcs/carton:  6pcs
   Meas:  500x430x370
   Shaver socket:  Have 220VAC and 110V AC

We are Specialized in manufacturing and exporting sanitary ware series]]> <![CDATA[Hair Dryer YD-750-2]]> Mon, 17 Nov 2008 15:32:57 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 Only 220V AC

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Hair Dryer YD-750-1]]> Mon, 17 Nov 2008 15:32:10 GMT This hair dryer is a wall-mounted unit that isolates electrical components from accidental water contact. It automatically activates when hand picec is removed from base and deactivates when replaced. The hose and hand picec are insulated to prevent heat build-up.Recommended for hotels,hospital and so on.


Specifications

 Safety timer automatically shuts off after 10 minutes.

 

 Voltage:

 220V~50Hz

 

 Current:

 4.5A

 

 Power :

 1000W

 

 Wind Speed :

 13.5-14m/s

 

 Body cover :

 Plastic

 

 Size(mm) :

 250x185x100

 

 Pcs/carton:

 6pcs

 

 Meas:

 500x430x370

 

 Shaver socket:

 no

We are Specialized in manufacturing and exporting sanitary ware series

]]> <![CDATA[Touch-free Hand Dryers YD-258]]> Mon, 17 Nov 2008 15:08:17 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Touch-free Hand Dryers YD-254]]> Mon, 17 Nov 2008 15:07:53 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Touch-free Hand Dryers YD-252]]> Mon, 17 Nov 2008 15:07:30 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Touch-free Hand Dryers YD-251]]> Mon, 17 Nov 2008 15:07:04 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Touch-free Hand Dryers YD-250]]> Mon, 17 Nov 2008 15:03:58 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Refine Hand Dryer YD-258]]> Mon, 17 Nov 2008 15:03:04 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Refine Hand Dryer YD-254]]> Mon, 17 Nov 2008 15:02:47 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Refine Hand Dryer YD-252]]> Mon, 17 Nov 2008 15:02:28 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Refine Hand Dryer YD-251]]> Mon, 17 Nov 2008 15:02:06 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Refine Hand Dryer YD-250]]> Mon, 17 Nov 2008 15:01:45 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Fashion Hand Dryer YD-258]]> Mon, 17 Nov 2008 15:01:24 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Fashion Hand Dryer YD-254]]> Mon, 17 Nov 2008 15:01:01 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Fashion Hand Dryer YD-252]]> Mon, 17 Nov 2008 15:00:38 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Fashion Hand Dryer YD-251]]> Mon, 17 Nov 2008 15:00:16 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Fashion Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:59:50 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Hotel Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:59:27 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Hotel Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:59:01 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Hotel Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:58:29 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Hotel Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:58:01 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Hotel Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:57:25 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Metal Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:57:06 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Metal Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:56:44 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Metal Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:56:23 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Metal Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:55:47 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Metal Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:55:23 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Automatic Sensor Hand dryer YD-258]]> Mon, 17 Nov 2008 14:48:15 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Automatic Sensor Hand dryer YD-254]]> Mon, 17 Nov 2008 14:47:45 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Automatic Sensor Hand dryer YD-252]]> Mon, 17 Nov 2008 14:47:26 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Automatic Sensor Hand dryer YD-251]]> Mon, 17 Nov 2008 14:47:03 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Automatic Sensor Hand dryer YD-250]]> Mon, 17 Nov 2008 14:45:23 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Basic Range Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:42:22 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Basic Range Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:42:00 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Basic Range Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:41:40 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Basic Range Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:41:17 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Basic Range Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:40:55 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Medium Range Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:40:32 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Medium Range Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:40:11 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Medium Range Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:39:42 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Medium Range Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:39:21 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Medium Range Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:38:18 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Sensor Operated Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:35:55 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Sensor Operated Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:35:23 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Sensor Operated Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:34:53 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Sensor Operated Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:34:22 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Sensor Operated Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:33:56 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Nozzle Activate Dryer YD-258]]> Mon, 17 Nov 2008 14:33:34 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Nozzle Activate Dryer YD-254]]> Mon, 17 Nov 2008 14:33:12 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Nozzle Activate Dryer YD-252]]> Mon, 17 Nov 2008 14:32:51 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Nozzle Activate Dryer YD-251]]> Mon, 17 Nov 2008 14:32:26 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Nozzle Activate Dryer YD-250]]> Mon, 17 Nov 2008 14:32:05 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Washroom Hand Dryers YD-258]]> Mon, 17 Nov 2008 14:31:41 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Washroom Hand Dryers YD-254]]> Mon, 17 Nov 2008 14:31:18 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Washroom Hand Dryers YD-252]]> Mon, 17 Nov 2008 14:30:58 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Washroom Hand Dryers YD-251]]> Mon, 17 Nov 2008 14:30:17 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Washroom Hand Dryers YD-250]]> Mon, 17 Nov 2008 14:29:53 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Beautifying Hands Drier YD-258]]> Mon, 17 Nov 2008 14:29:20 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Beautifying Hands Drier YD-254]]> Mon, 17 Nov 2008 14:28:59 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Beautifying Hands Drier YD-252]]> Mon, 17 Nov 2008 14:28:35 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Beautifying Hands Drier YD-251]]> Mon, 17 Nov 2008 14:28:15 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Beautifying Hands Drier YD-250]]> Mon, 17 Nov 2008 14:27:57 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Beautifying Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:27:37 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Beautifying Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:27:17 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Beautifying Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:26:54 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Beautifying Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:26:35 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Beautifying Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:26:14 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Auto Electric Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:25:53 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Auto Electric Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:25:31 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Auto Electric Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:25:12 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Auto Electric Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:24:50 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Auto Electric Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:24:30 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[High Range Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:24:07 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[High Range Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:23:46 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[High Range Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:23:28 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[High Range Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:23:02 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[High Range Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:22:40 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Stainless Steel Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:18:58 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Stainless Steel Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:18:39 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Stainless Steel Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:18:17 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Stainless Steel Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:17:54 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Stainless Steel Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:17:30 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Warm Air Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:17:09 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Warm Air Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:16:48 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Warm Air Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:16:23 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Warm Air Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:15:55 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Warm Air Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:15:19 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Bathroom Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:14:57 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Bathroom Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:14:38 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Bathroom Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:14:14 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Bathroom Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:13:54 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Bathroom Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:13:28 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Restroom Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:13:04 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Restroom Hand Dryer]]> Mon, 17 Nov 2008 14:12:34 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Restroom Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:12:10 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Restroom Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:11:48 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Restroom Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:10:56 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Commercial Hand Dryer]]> Mon, 17 Nov 2008 14:10:27 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Commercial Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:10:11 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Commercial Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:09:45 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Commercial Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:09:24 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Commercial Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:09:02 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Air Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:08:25 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Air Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:08:03 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Air Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:07:27 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Air Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:06:52 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Air Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:06:30 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Allied Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:05:58 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Allied Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:05:33 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Allied Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:05:13 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Allied Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:04:40 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Allied Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:04:14 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Super Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:03:52 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Super Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:03:30 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Super Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:03:10 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Super Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:02:50 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Super Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:02:29 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Multi Dri Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:02:04 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Multi Dri Hand Dryer YD-254]]> Mon, 17 Nov 2008 14:01:42 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Multi Dri Hand Dryer YD-252]]> Mon, 17 Nov 2008 14:01:19 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Multi Dri Hand Dryer YD-251]]> Mon, 17 Nov 2008 14:00:59 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Multi Dri Hand Dryer YD-250]]> Mon, 17 Nov 2008 14:00:37 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Nova Hand Dryer YD-258]]> Mon, 17 Nov 2008 14:00:09 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Nova Hand Dryer YD-254]]> Mon, 17 Nov 2008 13:59:44 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Nova Hand Dryer YD-252]]> Mon, 17 Nov 2008 13:59:23 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Nova Hand Dryer YD-251]]> Mon, 17 Nov 2008 13:59:03 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Nova Hand Dryer YD-250]]> Mon, 17 Nov 2008 13:58:41 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[American Hand Dryer YD-258]]> Mon, 17 Nov 2008 13:39:29 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[American Hand Dryer]]> Mon, 17 Nov 2008 13:39:04 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[American Hand Dryer YD-252]]> Mon, 17 Nov 2008 13:38:41 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[American Hand Dryer YD-251]]> Mon, 17 Nov 2008 13:36:35 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[American Hand Dryer YD-250]]> Mon, 17 Nov 2008 13:35:52 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Fast Dry Hand Dryer YD-258]]> Mon, 17 Nov 2008 13:34:42 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Fast Dry Hand Dryer YD-254]]> Mon, 17 Nov 2008 13:34:19 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Fast Dry Hand Dryer YD-252]]> Mon, 17 Nov 2008 13:33:44 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Fast Dry Hand Dryer YD-251]]> Mon, 17 Nov 2008 13:32:54 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Fast Dry Hand Dryer YD-250]]> Mon, 17 Nov 2008 13:32:18 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Electric Hand Dryer YD-258]]> Mon, 17 Nov 2008 13:31:50 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Electric Hand Dryer YD-254]]> Mon, 17 Nov 2008 13:31:17 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Electric Hand Dryer YD-252]]> Mon, 17 Nov 2008 13:30:45 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Electric Hand Dryer YD-251]]> Mon, 17 Nov 2008 13:30:16 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Electric Hand Dryer YD-250]]> Mon, 17 Nov 2008 13:29:43 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Sensor Hand Dryers]]> Mon, 17 Nov 2008 11:16:01 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Sensor Hand Dryers YD-254]]> Mon, 17 Nov 2008 11:15:42 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Sensor Hand Dryers YD-252]]> Mon, 17 Nov 2008 11:15:18 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Sensor Hand Dryers YD-251]]> Mon, 17 Nov 2008 11:14:57 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Sensor Hand Dryers YD-250]]> Mon, 17 Nov 2008 11:14:36 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[White Hand Dryer YD-258]]> Mon, 17 Nov 2008 11:14:08 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[White Hand Dryer YD-254]]> Mon, 17 Nov 2008 11:13:44 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[White Hand Dryer YD-252]]> Mon, 17 Nov 2008 11:13:21 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[White Hand Dryer YD-251]]> Mon, 17 Nov 2008 11:12:59 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[White Hand Dryer YD-250]]> Mon, 17 Nov 2008 11:12:32 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Touchless High Speed Hand Dryers YD-258]]> Mon, 17 Nov 2008 11:12:04 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Touchless High Speed Hand Dryers YD-254]]> Mon, 17 Nov 2008 11:11:39 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Touchless High Speed Hand Dryers YD-252]]> Mon, 17 Nov 2008 11:11:02 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Touchless High Speed Hand Dryers YD-251]]> Mon, 17 Nov 2008 11:10:36 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Touchless High Speed Hand Dryers YD-250]]> Mon, 17 Nov 2008 11:10:09 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Hand Dryer No Touch Bobrick YD-258]]> Mon, 17 Nov 2008 11:09:04 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Hand Dryer No Touch Bobrick YD-254]]> Mon, 17 Nov 2008 11:08:40 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Hand Dryer No Touch Bobrick YD-252]]> Mon, 17 Nov 2008 11:08:07 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Hand Dryer No Touch Bobrick YD-251]]> Mon, 17 Nov 2008 11:07:40 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Hand Dryer No Touch Bobrick YD-250]]> Mon, 17 Nov 2008 11:07:14 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[No Touch Hand Dryer YD-258]]> Mon, 17 Nov 2008 11:06:44 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[No Touch Hand Dryer YD-254]]> Mon, 17 Nov 2008 11:06:15 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[No Touch Hand Dryer YD-252]]> Mon, 17 Nov 2008 11:05:49 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[No Touch Hand Dryer YD-251]]> Mon, 17 Nov 2008 11:05:27 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[No Touch Hand Dryer YD-250]]> Mon, 17 Nov 2008 11:05:00 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Touchless Hand Dryer YD-258]]> Mon, 17 Nov 2008 11:04:09 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Touchless Hand Dryer YD-254]]> Mon, 17 Nov 2008 11:03:43 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Touchless Hand Dryer YD-252]]> Mon, 17 Nov 2008 11:03:07 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Touchless Hand Dryer YD-251]]> Mon, 17 Nov 2008 11:02:38 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Automatic Hand Dryer YD-258]]> Mon, 17 Nov 2008 11:00:01 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Automatic Hand Dryer YD-254]]> Mon, 17 Nov 2008 10:59:38 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Automatic Hand Dryer YD-252]]> Mon, 17 Nov 2008 10:58:10 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Automatic Hand Dryer YD-251]]> Mon, 17 Nov 2008 10:56:51 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Auto Hand Dryers YD-258]]> Mon, 17 Nov 2008 10:54:54 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Auto Hand Dryers YD-254]]> Mon, 17 Nov 2008 10:54:07 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Auto Hand Dryers YD-252]]> Mon, 17 Nov 2008 10:53:36 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Auto Hand Dryers YD-251]]> Mon, 17 Nov 2008 10:53:05 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Hand Dryer YD-254]]> Mon, 17 Nov 2008 10:52:08 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 35 sec ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  2550W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10.5KG
   G.W.:  12KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Hand Dryer YD-258]]> Mon, 17 Nov 2008 10:49:10 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Hand Dryer YD-252]]> Mon, 17 Nov 2008 10:48:33 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
4. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
5. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1350W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  300x130x230(mm)
   pcs/caron:  2pcs
   Meas:  550x380x200(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Hand Dryer YD-251]]> Mon, 17 Nov 2008 10:47:58 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  290x153x216(mm)
   pcs/caron:  2pcs
   Meas:  570x360x225(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Touchless Hand Dryer YD-250]]> Mon, 17 Nov 2008 10:46:17 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]> <![CDATA[Automatic Hand Dryer YD-250]]> Mon, 17 Nov 2008 09:31:02 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Auto Hand Dryers YD-250]]> Mon, 17 Nov 2008 09:28:29 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 
]]> <![CDATA[Hand Dryer YD-250]]> Sat, 15 Nov 2008 14:52:19 GMT Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hand s dryer, so that to reach the requirement of avoiding
mutual infections.


Featurers  
 
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle
 
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through
 
3.A light indicates the status of sensor: sensor on, off
 
4. Built-in safety devices turn off the unit when the temperature rises above 65ˇăC due to improper operation
 
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects
 
6. The concentrated air flow will dry hands efficiently within 30-45sec
Specifications  
   Voltage:  AC220V~240V 50Hz
   Rated Power:  1650W
   Wind Speed :  10m/s
   Body cover :  alloy aluminum
   Size:  260x190x215(mm)
   pcs/caron:  2pcs
   Meas:  520x320x240(mm)
   N.W.:  10KG
   G.W.:  11KG

Problem

Diagnosis

Remedy

Unit does not operate

Power off

Check power

Sensor lead wire loose

Connect the lead wire

Sensor distance too short

Adjust sensing distance

Sensing device damaged

Call service

Indicator light off

Power off

Check power

 

Indicator damaged

Call service

Not hot air

Heater wire broken

Call service for replacement

Motor not on

Motor damaged

 

]]>