Home Page » Products » Beautifying Hands Dryer » Beautifying Hands Dryer YD-258
Beautifying Hands Dryer
Model: Beautifying Hands Dryer YD-258
Product Origin: China
Company: NingBo City YinZhou Yied electronic co.,Ltd.
To purchase this fountain or for more information,please E-mail us!
Characteristic
Send off suitable hot air automatically when put hands below the nozzle,
to make your hands dryer, so that to reach the requirement of avoiding
mutual infections.
| Featurers | ||
1.The unit turns on automatically when hands are positioned within 15 cm of the nozzle |
||
2.The sensor activates the unit with a 0.5 sec. delay to avoid being turned on mistakenly by unidentified objects passing through |
||
3. A light indicates the status of sensor: sensor on, off |
||
4. Built-in safety devices turn off the unit when the temperature rises above 65°C due to improper operation |
||
5. The unit will cut power off when continuously operated for over 1 min ,to avoid activation by unwanted objects |
||
6. The concentrated air flow will dry hands efficiently within 30-45sec |
||
| Specifications | ||
| Voltage: | AC220V~240V 50Hz | |
| Rated Power: | 1650W | |
| Wind Speed : | 10m/s | |
| Body cover : | alloy aluminum | |
| Size: | 290x153x216(mm) | |
| pcs/caron: | 2pcs | |
| Meas: | 570x360x225(mm) | |
| N.W.: | 10KG | |
| G.W.: | 11KG | |
Problem |
Diagnosis |
Remedy |
Unit does not operate |
Power off |
Check power |
Sensor lead wire loose |
Connect the lead wire |
|
Sensor distance too short |
Adjust sensing distance |
|
Sensing device damaged |
Call service |
|
Indicator light off |
Power off |
Check power |
|
Indicator damaged |
Call service |
Not hot air |
Heater wire broken |
Call service for replacement |
Motor not on |
Motor damaged |
|
